Dec 15, 2023 Leave a message

Correct Operation of High-Low Speed Paddle Shifters

The proper use of high-low speed paddle shifters is crucial. Accurate and flexible use of these shifters can enhance driving efficiency and operational smoothness. Below, we will outline the correct method for switching gears using high-low speed paddle shifters.

2

Firstly, high-low speed paddle shifters are typically located at the three o'clock and nine o'clock positions behind the steering wheel, one on each side. The left paddle is used for downshifting, while the right paddle is used for upshifting.

To use the paddle shifters correctly, start by setting the gear lever to the "D," "S," or manual mode. Once the engine is running at an appropriate RPM, you can easily switch to the desired gear by flicking the paddle shifters.

Unlike traditional shifting with a clutch, using high-low speed paddle shifters does not require pressing the clutch pedal. This means that, while gripping the steering wheel with both hands, you can perform upshifts and downshifts conveniently using the paddle shifters.

Furthermore, many people are confused about whether to release the throttle while using paddle shifters. In reality, as long as the engine is running at the right RPM, there is no need to release the throttle when using the paddle shifters.

Similar to the conventional practice of releasing the throttle during deceleration and pressing it during acceleration, the same applies to paddle shifter operation. The key is to ensure that the engine speed is appropriate, and then switch gears directly.

Finally, using high-low speed paddle shifters can significantly improve driving efficiency. However, it is essential to avoid over-shifting to prevent damage to the clutch. Therefore, when using paddle shifters, choose the appropriate gear based on the specific situation to ensure smooth shifting and normal vehicle operation.

Send Inquiry

whatsapp

skype

E-mail

Inquiry